CINGITUR BOCIS

Every now and again I have the impulse to make smaller thrown covered box forms, be they fluted, faceted, stamped, slipped or in this case ringed. Part of the goal is to fit these pieces in between larger pots and filling in space that may otherwise remain empty and a lose kiln is an unhappy kiln. This particular covered box form was made by way of cheating a bit, once thrown and then basically tooled, I further tooled in the concentric circles surround the piece on the body and lid to keep them unified in surface. I call these "cingitur bocis" (ringed box) partly after an abstract I read years ago about a 17th century astronomer waiting on his proof that Saturn had rings but don't quiz me because without doing a google search most of the details are either long gone or buried so deep I may short cuircuit trying to dig out the info. At any rate the idea is simple enough and generally speaking depending on the glazing the high points of the ridges shows a bit differently than the recesses making for a nice contrast. At the end of the day I am not quite sure what you would do with such a box though it would hold a healthy ration of peanut butter M&M or your four favorite golf balls. 

DREADFUL FEELING

I am sure there are a lot of similar stories but this one happened just recently to me. The postperson rang the doorbell last week and I could see through the side window she had a very grim look and when I opened the door, I knew exactly why. As you can see the outer box looks like alien robots* were perfecting their karate chops on the box which as it turns out was only a reasonable amount bigger than the packed wood box and pot inside. The package had a label which clearly indemnified the USPS agains the damage stating; RECEIVED IN DAMAGED CONDITION with a date and initial hastily scribbled on the attachment.The post person mumbled some sentiment and left in something of a hurry but I guess I can't blame her.  I brought the package upstairs and took multiple photos of the exterior and along the way as I unpacked the piece.      

Besides the dreadful feeling that was rumbling like a mobius loop in my mind I immediately encountered the contents which by sheer luck was so well packed, maybe overpacked that I began to have hope that the contents would be intact. Layer after layer, three in total comprised of folded paper turned into contruction material and big and then finally small bubbled wrap all surrounded the wood box which after removing the materials was untouched by the out of control robots* that must have first inflicted this external damage.           

Once unencumbered, I opened the wood box and found yet more packing material done by someone who both cared and knew how to pack, the chawan was intact and none the worse for wear and I will post it at some point in the future. I guess the real meat of this tale is that no matter where a pot is coming from, across state or around the world it is impossible to foresee the travials that will plague the piece and no way of knowing just how well and cared for the packing will be. In this case all's well that ends well but with each and every piece that speeds its way here or from here, I am constantly reminded that the outcome upon receipt hangs in the balance of just how a handful of bubblewrap, some newprint, tape and a box are used to best effect with some time thrown in to kept haste from becoming the enemy of the baked and ever so slightly fragile clay.

(*Robots, yes I am a bit fixated on them having grown up watching horribly bad 50s, 60s and 70s Sci-Fi on TV and the weekend matinees.)

COUNTERBALANCED

What may be utter simplicity in form is clearly counterbalanced in the complexity of the yuteki temmoku glazed surface. Thrown out of a simple, off-white buff clay, this chawan was thrown simply and effectively on the well and other than some clean and uncomplicated tooling of the foot the bowl was left just as it came off the wheelhead. As for the surface, the potter created a simple strata pattern using two distinct styles of temmoku, the light rusty one sandwiched between the dark layers all tied together in the mutitude of oil-spot punctuations the encompass the form, inside and out. 

Though this is an older bowl by the iron specialist, Kimura Morikazu*, first of Kyoto and later from Echizen, he specialized in a broad and diverse spectrum of yuteki-temmoku glazes including some later experimentation with yohen effects creating vivid iridescent surfaces. This partiuclar yuteki temmoku was a style he used for some time and though complex in its origins and technology it is rather simple in appearance which truly works in harmony with the simple form creating an evocative and even elegant object which in this case just happens to be one of my favorite things in the world, a well made and considered chawan.  

"Harmony makes small things grow, lack of it makes great things decay."  Gaius Sallustius Crispis 

(*I should also mention if you do a search for Kimura Morikazu on the I, POTTER blog you will see several other pots in this style including another chawan and a guinomi.)

TEMPO

In a previous firing I decided to give several different glazes on combed or carved white slip over black slip a crack (bad choice of words for a potter?) and this is the soda blue example. The combing is a bit lazy allowing the decoration to change tempo as it goes around the slipped flange of the bowl which I like a bit more than a constant and even design. The bowl was thrown out of stoneware and measures just about 11" across now and allong with the other two pieces, one in amber and one in Oribe style green came out looking fine in their new colored duds. Though on the back burner I am planning to make plates, bowls, covered serving pieces and covered jars in these color schemes moving forward but as age has taught me that caution, planning and testing should proceed before just glazing up a kiln load and hoping for the best. 

"The more complicated and powerful the job, the more rudimentary the preparation for it."  Wm. F. Buckley Jr. 

SAKEZUKI

Illustrated is a Karatsu style guinomi or more properly sakezuki by Tsujimura Kai. Taking guidance from his father, Tsujimura Shiro and cues from the various traditions that interest him, Tsujimura has thrown a rather light, broad piece with a fine, small foot, carefully balanced but ever so slightly precarious on its perch. The form is low and broad, cutting a nice silhouette and is glazed in a surface that shows quite a visual variety where off-white collides with brown ash and amber tones cascade into the cup around the lip creating a rich and visually engaging landscape making the sakezuki more than pleasant to use. Like much of his father's work, this piece has that distinct feel of antiquity, despite its modern origins the core of the Karatsu tradition is written across the form and surface without a hint of an contemporary burden, simple, to the point and ageless.

WEATHERED

Illustrated is another old Japanese lock style vase form by Shigaraki potter, Kengo Saeki. I have seen a number of these forms over the years and most are of modest scale, perfect for use and neither too small or too large but what makes this one a bit different is that it is one half scale of most that I have seen previously. What this vase form lacks in size it more than makes up for in attention to detail, character and a wonderful landscape differing on front and back. At first glance it could almost seem like these are two different pots where the one side shows off an archaic, rusted and corroding with areas of ash creating a fine texture while the other side has ash built up in different layers creating green glass along many of the angles created through the design. With each encounter of these vase forms I am reminded of ancient, weathered bronzes of centuries past where time has taken hold and added naturally to the pieces without any fuss or planning, producing an object that no amount of technique and skill alone could have created. As with my previous encounters in photos or in person, I look forward to the next chance meeting with the works of Kengo Saeki.

THE LITTLE CUP THAT COULD

Illustrated is a small "bourbon" cup with a slightly troubled past. Starting at the beginning this cup was from a group of pieces thrown off the hump using a small batch, gritty, sandy clay, most were facetted of which for some reason, I thought this was the best of the group. Being the top of the class as it were, I decided to go with the tried and true Oribe with iron and along with some 45 other pots, it was loaded and fired. Once unloaded, I realized that the very bottom of the kiln was slightly underfired and I decided to put this aside and fire it again to see what would develope. Loaded again and then midway through the firing we had a power outage leading to the loss of nearly the entire kiln load or really about 75% of the contents. For what ever the reasons are, most of my glazes do not fair well when they are firing and the temperature drops quickly leading to bad pinholes and a rather dull, muddy surface and are even worse when refired.  As I was surveying the bad to worse result, I decided to just hang on to this cup and several other pieces to refire next glaze fire to see what the results may be and in this case, third time is a charm (?).       

As you can see, the cup came out with a number of other Oribe based pieces with deep, shiny surfaces with not a single pinhole and truth be told, I am glad I decided to refire these pots, most of which I am much happier with now than I was just a few short days ago. A fellow collector asked me about when I was happy with my work and I told him, the feeling is always short lived but I must admit, I was happy with this little cup that could for more than the usual five minutes and it is likely to become my new bourbon cup for the foreseeable future for at least eleven minutes into the future.

MEMORABLE INTRODUCTION

I have to admit, before I encountered this Oribe vase, I had never heard of Sone Yoshiyuki which considering my interest in Oribe has been something of a conundrum. As you can see, this animated vase has a rather fantastical surface created after the pot was glazed and fired on its side, the surface has run in streaking layers toward the bottom as the pot lay creating a landscape that both reminds me of rock strata and a foreign landscape from a distant gas giant beyond our reach. The glaze has run toward the prominet and distinct shell scars which fossilized during the firing adding more details that bring the viewer in to survey the varying elements that create the whole. Either lug has a rather distinct bidoro drop, suspended as if gravity does not apply and the entire pot is streams of mingling iron and copper almost mimicing neriage until you look deep into the surface of the glaze to see the thrown bones of the hanaire.   

As for the form itself, this vase is a creative amalgam of the old and the new, borrowing some elements of old pottery while striving to show a modern rendition of classicism and an inner voice imbued with the playful* whimsy Oribe sprung from. The form has a casual quality to it while its posture is both determined and study showing off the simple alterations to the thrown piece that seem natural and in harmony with the finished object.  I have written about Sone Yoshiyuki previously showing off a magnificent bidoro emerald earring suspended from a vases's lug showing off the details that pull a viewer into the orbit of his pottery as well as making for a rather unique first impression and acting as a most welcome and memorable introduction. 

(*PLAYFULNESS IN JAPANESE ART by Tsuji Nobuo)

LIVELY ATTIRE

Illustrated is a rather impromptu photo of a vivid and animated nebula temmoku chawan by Kimura Moriyasu. The bowl, in transit as it were was sitting on the the chest when the sun very graciously decided to rake accross the chawan highlighting the running glaze, showing off the rich amber lip and multi-colored range of rivulets making their way down the bowl paying homage to heat and gravity.   

Thrown out of a crepe texturered buff clay, the form is simple, based on an archetype originated across the sea with a slight uneven wavering to the lip and a deep, almost profound well ending in a perfect mikomi. As straightforward as is the form, the surface is innovative and alive as the layers were first built up and then melted, comingled and ran down the bowl in short, controllable burst through what ends up looking like distinct bands of color surrounding the chawan. Though this photo was not staged, nor was permission asked for, this candid gives a good sense of what this Kimura Moriyasu chawan is really all about and like a perfect model, classic canvas clothed in expressive and lively attire.

ON THE OFF CHANCE

Illustrated is my old amber ressurected and used on a test yunomi on the off chance that it would work with a bit of wash over the surface. This addition was last minute when glazing a couple of weeks back and made its way between some v-bowls filling those dreaded empty nooks and crannies of the kiln. The addition of the manganese/ copper wash really adds to this surface and creates a depth to the glaze that it lacks as well as a bit of motion to the surface. I am rather glad the idea popped into my head as I was glazing and am looking forward to trying it on a less textural surface to see if the surface is as interesting without all of the fluting. I am in the process of glazing currently and further testing will have to wait until the next cycle unless something comes up and it usually does.