MOMENTARY RESULTS

Like a lot of the rest of the country, the weather has not been exactly ideal here and there are those times when I am certain I may never see sunshine again and the past two days have been just that. Yesterday we had ice and snow with more ice on top building creating a blanket of crusty ice across the region, but no sun to speak of and today between intermittent icy rain and thick fog the day has been bleak at best until for a brief few moment that sun poked through the clouds and the resulting picture is the momentary result. I grabbed the camera and took the shot just in time for the sun to disappear and then checked to see if the camera captured what my eye had seen and luckily enough it did. Half cloaked in darkness a chaire emerged from the shadows to reveal a wonderful surface of ash with a rich bidoro drip reminding me of an ice coated rock face in the midst of a spring thaw. This particular Shigaraki chaire is by the late kiln and pottery master, Furutani Michio and was made sometime in the first decade of his career. I have made a slideshow of the pot and will put it up at another time but I thought for today, this image would suffice and would make a dreary Wednesday just a bit brighter.

OVERALL

Last week I posted up a detail shot of a lid that I repaired with pewter lacquer and thought to post up a picture of the overall view of the pot. Though not particularly large, I thought the pot had come out rather nice with a thick slip combed texture under one of my Oribe style glazes in which the exposed clay through the slip and depth of the recesses makes for a wide array of glaze effects and color variations. Though I have broken my fair share of pots over the years and have grown somewhat callous to the process, I just didn't want to break this piece and decided that the slight repair was more than enough to save the pot from the shard pile. I should also say that had the lid or body of the pot cracked due to my throwing or drying I would have broke it without a second thought but having foreign matter in the clay is just a variable I have zero control over and in my mind the mitigating circumstance.

HAPPY HOLIDAYS 2015

I wanted to take a moment and wish everyone the Happiest of Holidays, a Merry Christmas or Festivus to all from Khan and the folks here at I, POTTER!

INSTANT ASSOCIATION

I have had this photo on the hard-drive for some time and decided it was time to put it up on my blog. I came across this doing some web surfing, I think I was specifically searching for Hamada Shoji and this pot showed up and it was an immdiate case of instant association. The reason I kept it, besides being a classic and nice example of Okinawan pottery was that I could not help but be reminded of Christmas by the overall appearance of the piece. To the best of my knowledge this mizusashi is not marked/ signed but has many of the classic signs of traditional modern Okinawan (Ryukyu) pottery with a heavily slipped body, carved decoration, addition of rich colored accents, iron and or gosu highlights, a good quality clear glaze and lastly overglaze enamel decoration. In this case the bright red and green overglazes coupled with the copper and cobalt washes and a tropical theme makes me think of a San Diego Xmas and despite knowing better, I can't help but think of this pot as the first Xmas Okinawan mizusashi that I have ever seen. Happy Holidays!

HAMMERTIME?

I recently fired  a glaze kiln and everything seemed to have gone well until the final inspection. One larger Oribe combed slip jar had an issue, near the knob on the lid what appeared to be a small amount of metal boiled out of the clay leaving something of an odd crater. I spent a lot of time looking at the lid under a magnifier and suspect it was a small piece of metal banding strap that melted out of the piece and for anyone keeping track, this is the second such incidence. After thinking about what to do next, I was rather reluctant to just break the piece and instead I used a dremel and ground out the area and then filled it will a pewter infused lacquer to fill the void. While I admit I would have preferred this not to happen, I think the repair adds a little something to the pot and quick frankly I thought the pot came out rather nice and just didn't have the heart to just take a hammer to the pot. I am not one to let damaged or cracked pots out there but I think in this instance, I would give it a pass.

BEAUTY IN USE

There are a large number of pots, both Eastern and Western that make me think of the Rosanjin concept that a pot is complete when it is being used. There is beauty in use as can be seen in this photo from a catalogue on the late Bizen Ningen Kokuho, Fujiwara Yu (1932-2001) as the magnificent color of the rectangular tray is made all the richer with the red crab and green garnish. The light coating of ash highlights the edges and corner while the potent fire color has painted the tray for with captivating tones of  reddish-orange and purples spotted with drops of charcoal grey and even blues. I can imagine this is a striking piece without the window dressing but it is in its use that this tray really comes to life and fufills the purpose and aesthetic that it was created for. As Yanagi put it, beauty born of use but in this case it is the beauty in use that tells the fullest story.

 

 

FLOWER BLOCKS

Now and again I decide to try to make something out of round and set a limit to see what can be done in that block of time. I decided to make a square vase form that would then be heavily slipped and these flower blocks are what I came up with. Thrown round without a bottom and then quickly squared on the wheel I used my heat gun to firm them up and then rolled out a quick slab for the bottom of the pot. Once the base was attached and a quick coil attached around the base interior I slipped and combed the first vase and then set about making a second which was a bit bigger and managed to take less time than the first. They both came out just about as I saw them before they were made and I will likely glaze them in the Oribe or Ao+ once they are bisque and ready to glaze. Admittedly there is nothing ground breaking in any way about these two flower blocks but when 90% of what you make is round, getting out of the round and altering the routine is reward enough in itself.

"Routine is not organization any more than paralysis is order." Sir Arthur Helps (1813-1875)

FELDSPAR & ASH

I put together a short slideshow video of a vase that arrived here recently. The piece is a Shino and haiyu glazed vase by Oribe and Shino specialist Higashida Shigemasa and is basically a mix of feldspar and ash on the surface. Using his signature Hakusetsu Shino, this vase shows a very strong deconstructivist style that is married with the aesthetics of contemporary Japanese ceramics. This blend makes for a rather unique and idiosyncratic visual that is easily recognizable as the work of Higashida Shigemasa for which he is so well know for in Japan and abroad. Each angle and manner of presentation presents an entirely new landscape to the pot, with each turn of the piece the pot communicates a more and more complex narrative which is another signature associated with Higashida's work.

RANT WARNING

I had another one of those conversations regarding kamakizu the other day and let's be clear for the record, the word is easily defined; kama = kiln and kizu = flaw. In this case they were extolling the virtues of kamakizu and the wabi/sabi aesthetic and how this enhances the keshiki landscape of a pot. Now I am all in on the fact that cracks in certain vessels add to the sense of austerity and rusticity of a pot but a vessel that is intended to hold liquid, especially hot liquids is made all the worse with a crack that leaks. All you need do is ask the little Dutch boy about cracks and get his two cents. In the numerous times that I have wood fired going all the way back to 1989, I have never once seen a potter in the US or Japan jump for joy when a pot came out with a crack that in essence negated its purpose. What was missing was any commentaries about aesthetics and wabi/sabi, not a whisper, a cracked pot is a cracked pot. I have written and firmly believe in the sense of scarred beauty as it relates to wood fired pots and even see the appreciation of a pot with a crack that stands as a visual testament to the fury and violence of the process. At the end of the day, a chawan, yunomi, mizusashi or what have you is intended to hold liquid first and foremost and when it fails at that task, how does a kamakizu enhance the piece in any real or tangible way?

(I know, not much in the way of a rant but I thought I would warn off anyone that wasn't particularly interested in my editorial position on this issue. Any rebuttals, responses, criticisms or objections can be addresses to my attorney at the law firm of Dewey, Cheatum and Howe.)

HOMOGENEITY

I am not a huge fan of making clay these days, even in small batches. Back at Cleveland State, Kent State and a few other place I have worked, I made huge amounts of clay, from dry to wet, from start to finish and by lots I mean tons and tons of clay for myself and various classes as the studio tech. I paid my dues and now have clay made for me or I buy commercially available clay for most of what I use. Like everything else though on occasion I get this bug to make up a clay body that I used to mix with my stoneware clay that I also made myself and we are off to the races. I tend to work in small batches, about 25 pounds dry for each and mix them up to a slurry consistency and then dry each of them separately on plaster until they firm up and wedge them together until they are completely homogeneous. Now after way too much work, they are ready to use.

I'll start by saying this picture is not of clay ready for neriage, this is the first wedge and cut of the mixed stoneware and iron rich clay that I made to be mixed. I wedge the clay 50 times or so and then cut it in half, reverse the surfaces and then do the same at least two more and usually three more times to get an absolutely thorough mixing of the two clays. I realize this may seem to be more work than it is worth but it creates a very different surface with the various Oribe and iron yellow glazes and throws like a dream. One of these days I need to get someone else to make a ton or so of this clay for me then I can just open the box and bag and throw.